Home Hardware › Zinc › hillman 1 x 1 2

Hillman No. 10-24 in. x 1-1/2 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Machine screws are used with nuts or screwed directly into a threaded socket to hold metal parts together. Measure from the bottom of the head to the tip of the screw to get Fastener Length. If nuts are needed use nuts with the same finish and tap for... more

Hillman #8 x 1-1/2 In. Phillips Flat Head Zinc Chromate Wood Screw (10 Ct.) 5790

Zinc Wood Screws are designed to join two pieces of wood. Smooth shank allows the screw to pull two pieces of wood together for a tight join while preventing the wood from pulling or splitting. Requires a pilot hole for installation. Common... more

Hillman Fasteners 80240 Zinc Plated Sheet Metal Screws # 14 x 1-1/2 Box

Sheet metal screws or tapping screws are highly versatile. Though they are designed to attach metal to metal they re also used to attach metal to wood fiberglass and plastic. Great for general repair around the house their sharp threads draw materials... more

Hillman 10 in. x 1/2 in. L Phillips Pan Head Zinc-Plated Steel Sheet Metal Screws 100 1 pk

These metal screws or tapping screws are highly versatile and are used to attached metal wood fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Metal screws are fully threaded with a sharp point. more

The Hillman Group 290036 Zinc Fender Washers 3/8 x 1-1/2 100 Pieces

A fender washer is a flat washer with a thinner body and an increased outer diameter. They are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction. Designed for auto body repair fender washers are... more

Hillman 80192 Zinc Sheet Metal Screw #8 x 1-1/2 100 Pack Each

HILLMAN SHEET METAL SCREW #8 x 1-1/2 Zinc Wood/Sheet Metal Combo Phillips Screw Case hardened 100 Pack more

Hillman Fasteners 40180 Wood Screws Phillips Zinc Plated Steel 14 x 1-1/2 # Box/100

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman Fasteners 80054 Zinc Plated Sheet Metal Screws # 8 x 1-1/2 Box

These sheet metal screws or tapping screws are highly versatile and are used to attached metal wood fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Sheet metal screws are fully threaded with a sharp point.... more

Hillman 12 Sizes x 1-1/2 in. L Slotted Hex Head Zinc-Plated Steel Sheet Metal Screws 100 pk

Introducing Hillman s Slotted Hex Head Sheet Metal Screws offering 12 different sizes with a length of 1-1/2 inches each. This pack includes 100 screws providing versatility and reliability for a variety of fastening tasks. Crafted with precision and... more

Hillman 8 in. x 1/2 in. L Phillips Pan Head Zinc-Plated Steel Sheet Metal Screws 100 1 pk

Sold as 6 UNITS at $3.75 per unit. 1 unit = Bx/100. Phillips. Bread head. Case hardened. Box/100. No. 8 x 1/2 inches. Manufacturer number: 80036. SKU #: 56211. Country of origin: Taiwan. Distributed by Hillman Group Rsc. more

Hillman 70322 Zinc Sheet Metal Screw #12 x 1-1/2 100 Pack Each

HILLMAN SHEET METAL SCREW #12 x 1-1/2 Zinc Sheet Metal Screw Slotted Hex Washer Head 100 Pack more

Hillman No. 6-32 X 1-1/2 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools etc. Fasten with... more

Hillman Hex Bolts and Nuts Grade 2 Steel Zinc 1/4-20 x 1 5 Sets

Hillman zinc plated steel Hex bolts are machine bolts that have been designed to join materials to prevent shear movement. Zinc grade 2 hex bolts are recommended for most general uses and are corrosion resistant for typical use. The Hex Bolts feature a... more

Hillman 5/16 in. x 1-1/2 in. L Hex Zinc-Plated Steel Lag Screw 100 pk

This product is part of Hillman s extensive line of high-quality hardware known for its reliability and strength. Constructed from premium-grade steel these lag screws are 5/16 inches in diameter providing substantial sturdiness for your applications.... more

Hillman 1/4 in. D X 1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk

Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws feature a coarse 1/4 -20 USS thread size. Brand Name: HILLMAN Head Diameter: 1/4 in. Length: 1/2 in. Finish: Heat Treated Zinc... more

Hillman 884760 Carriage Bolt 3/8 in. Dia. x 1-1/2 in. L Grade 5 Zinc

This Hillman Grade 5 Carriage Bolt is designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is... more

Hillman 8 in. x 1/2 in. L Phillips Pan Head Zinc-Plated Steel Sheet Metal Screws 100 1 pk

Pan head Phillips sheet metal screws are designed to attach metal to metal they re also used to attach metal to wood fiberglass and plastic. Zinc plated. Size: #8 x 1/2 In. Material: Steel Head Type: Pan Drive Type: Phillips Finish: Zinc Thread... more

Hillman 560362 100 Pack 12-14 x 1-1/2 Zinc Plated Hex Washer Se Each

100 Pack; 12-14 x 1-1/2 Zinc Plated Hex Washer Head Self Drilling Screw. more

Hillman 7719 Round Combination Head Machine Screw 1/4 in. x 1/2 in. Zinc 8-Pack

Stove bolts are used to fasten metal parts together that are going into a tapped hole and being held together by a nut. To obtain the fastener length measure from the underside of the head to the tip of the screw. Stove bolts are nearly identical in... more

Hillman No. 10-24 X 1-1/2 in. L Slotted Flat Head Zinc-Plated Steel Machine Screws 8 pk

Flat-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

Hillman 5814 Flat Head Zinc Wood Screw #10 x 1-1/2 8 Pack Each

#10 x 1-1/2 Phillips Flat head. Zinc wood screw. 8 Pack #10 x 1-1/2 Phillips Flat head Zinc wood screw. more

Hillman 833104 Hex Cap Screw 1/2 in. Diameter x 2 in. Grade 8 Yellow Zinc 2-Pack

The Hillman Grade 8 Yellow Zinc Hex Cap Screw is perfect for most applications in which a stronger sturdier bolt is desired. A common feature on the hex cap screw is a washer surface directly under the head which creates a better seal. Use the hex head... more

Hillman 882714 1/4 -28 Fine Thread x 1 Grade 8 Yellow Zinc Hex Cap Screw 2-Pack

FEATURES: The Hillman Grade 8 Yellow Zinc Hex Cap Screw is perfect for most applications in which a stronger sturdier bolt is desired. A common feature on the hex cap screw is a washer surface directly under the head which creates a better seal. Use... more

The Hillman Group 70322 12-Inch x 1-1/2 -Inch Hex Washer Head Slotted Sheet Metal Screw 100-Pack zinc

The Hillman Group 70322 12-Inch x 1-1/2 -Inch Hex Washer Head Slotted Sheet Metal Screw 100-Pack zinc Product Description These sheet metal screws or tapping screws are highly versatile and are used to attached metal wood fiberglass and plastic. The... more

Hillman Hex Cap Screw 3/8 - 16 X 1-1/2 Zinc Dichromate Grade 8 Steel Hex Head

Hillman 3/8 - 16 x 1-1/2 Hex Screw with Zinc Dichromate Grade 8 Steel Hex Head more

Hillman Wedge Anchor 1/4 X 2-1/4 Zinc Plated Steel

Introducing the Hillman Wedge Anchor a reliable and versatile fastening solution designed to securely anchor objects to concrete brick or block surfaces. Crafted with precision and durability by Hillman a trusted leader in hardware solutions this wedge... more

Hillman Pan Head Phillips Machine Screw 1/4 -20 x 1/2 Zinc Steel 9 Sets

Hillman Coarse Machine Steel Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines... more

Hillman No. 8-32 in. x 1-1/2 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Machine screws are used with nuts or screwed directly into a threaded socket to hold metal parts together. Measure from the bottom of the head to the tip of the screw to get Fastener Length. If nuts are needed use nuts with the same finish and tap for... more

Hillman Machine Screws No. 10 - 24 X 1-1/2 Zinc Combination/Phillips/Slotted Round Head Box 100

Hillman No. 10-24 in. x 1-1/2 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk more

The Hillman Group 290009 Fender Zinc Washers 3/16-Inch x 1-1/2-Inch 100 Piece

Zinc-plated. Packed 100 per box. Auxiliary retails reflect per each retail. This fender washer is a flat washer with a thinner body and an increased outer diameter offering greater surface bearing. They are chosen when a large outer diameter is... more

Hillman Fasteners 80192 Zinc Plated Sheet Metal Screws # 8 x 1-1/2 Box

These sheet metal screws or tapping screws are highly versatile and are used to attached metal wood fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Sheet metal screws are fully threaded with a sharp point.... more

Hillman Fasteners 560362 Zinc Plated Steel Self Drilling Screws #12 X 1-1/2

These self-drilling screws are used in wood fiberglass and metal and they possess a drill point enabling it to drill in its own hole in thin gauge steel. The sharp threads create their own mating thread when drilled into the material. No pre-drilled... more

Hillman 967041 #14 x 1-1/2 in. Zinc Hex Washer Head Self-Drilling Screw 25-Pack

Product Details The Hillman Zinc Hex Washer Head Self-Drilling Screw is used in wood fiberglass and metal and they possess a drill point enabling it to drill its own hole in thin gauge steel. The sharp threads on these self-drilling screws create their... more

Hillman No. 8-32 X 1-1/2 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools etc. Fasten with... more

Hillman 70283 Zinc Plated Hex Washer Head Sheet Metal Screw #8 x 1-1/2 in.

Hex slotted washer head sheet metal screw. Designed to attach metal to metal they can also be used to attach metal to wood fiberglass and plastic. Features sharp threads that draw materials together and ensure a secure hold. Zinc plated. Packed... more

Hillman 70304 Zinc Sheet Metal Screw #10 x 1-1/2 Each

HILLMAN SHEET METAL SCREW #10 x 1-1/2 Slotted Hex Washer Head Zinc Sheet Metal Screw 100 Pack more

Hillman 1/4 in. x 3-1/2 in. L Hex Zinc-Plated Steel Lag Screw 100 pk

Hillman Lag Screw 1/4 X 3-1/2 Grade 2 Hex Head more

HILLMAN No. 10-24 in. X 1-1/2 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 8 pk

The Hillman 10-24 Round Head Machine Screw with Nut is a must-have at your home for easy fastening of metal parts together. It is measured from the bottom to enable better fastener length. more