Home Hardware › Steel › 1 1 4 nickel plated

B&P Lamp® 1-1/4 Inch Diameter 1/8 IP Stamped Steel Check Ring Nickel Plated Finish

Stamped steel seating ring with curled edge nickel plated slips 1/8IP 1 1/4 Inch diameter more

Waldom F491C 4-40 X 1-1/4 Slotted Steel Nickel Plated Round Head Machine Screws (100 pack) - F491C

Waldom F491C 4-40 X 1-1/4 Slotted Steel Nickel Plated Round Head Machine Screws (100 pack) Waldom F491C more

#9 x 1-1/4 Satin Nickel Plated Steel Phillips Flat Head Hinge Screws

Diameter: #9 Length: 1-1/4 Material: Steel Finish: Satin Nickel Head Style: Flat (Phillips) Thread Length: Partial Type: Hinge Screw Used for attaching door hinges. more

Prime-Line Sliding Door Loop Lock, 1-1/4 in, Hardened Steel Bar w/Diecast Base, Nickel Plated (Single Pack) in Gray | 1 H x 4 W x 5.5 D in | Wayfair

These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a... more

Prime-Line Sliding Door Loop Lock, 2-1/4 in, Steel, Nickel Plated, Right Hand (Single Pack) in Gray | 7.4 H x 3.75 W x 1.2 D in | Wayfair U 10536

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Door... more

Prime-Line Nickel-Plated Double-Wing Flush Clips, Steel in Gray | 4.75 H x 1.85 W x 1.05 D in | Wayfair L 5772

These Double-Winged Flush Window Retainer Clips from Prime-Line Products are constructed from stamped steel and come in a rust-resistant, zinc-plated finish. They are designed to mount on narrow, vertical rails on the exterior side of dividing window... more

Campbell Chain T7665032 Welded Ring 1-1/4 Inch Inside Diameter Nickel Plated Steel Each

Welded rings upc tagged bulk nickel plated size 1-1/4 inches work load limit #s=200. Welded rings upc tagged bulk nickel plated size 1-1/4 inches work load limit #s=200. 1-1/4 inch die cast zinc with nickel finish welded ring wll 200 lb bulk. Campbell... more

(case of 2) National Hardware N278-044 Shade Bracket Nails 3/4 Inch 1-1/2 Ounce Nickel Plated Steel

1-1/2 oz 3/4 inches x 15 shade bracket nails. For use on projects where small nails are needed. For use on molding and trim. Approximately 114 pieces per pack. Nickel plated steel material. more

B&P Lamp® 1-3/4 Inch Diameter 1/8 IP Stamped Steel Check Ring Nickel Plated Finish

Stamped steel seating ring with curled edge nickel plated slips 1/8IP 1 3/4 Inch diameter more

#9 x 1-1/4 Satin Nickel Plated Steel Phillips Flat Head Hinge Screws

Diameter: #9 Length: 1-1/4 Material: Steel Finish: Satin Nickel Head Style: Flat (Phillips) Thread Length: Partial Type: Hinge Screw Used for attaching door hinges. more

National Hardware N278-044 Shade Bracket Nails 3/4 Inch 1-1/2 Ounce Nickel Plated Steel

1-1/2 oz 3/4 inches x 15 shade bracket nails. For use on projects where small nails are needed. For use on molding and trim. Approximately 114 pieces per pack. Nickel plated steel material. more

1/4 x 0.4 Nickel Plated Steel Shelf Supports SHSPT-020

Diameter: 1/4 Diameter 2: .4 Material: Steel Finish: Nickel Drill Size: 1/4 Style: Spoon Type: Shelf Support Application: 1/4 Hole A shelf support can be either plastic or metal and it is inserted into the sides of furniture beneath shelves to suspend... more

Waldom F020C 4-40 x 1/4 Slotted Steel Nickel Plated Binder Head Machine Screws (100 pack) - F020C

Waldom F020C 4-40 x 1/4 Slotted Steel Nickel Plated Binder Head Machine Screws (100 pack)Waldom F020C more

1/4 x 0.4 Nickel Plated Steel Shelf Supports

Diameter: 1/4 Diameter 2: .4 Material: Steel Finish: Nickel Drill Size: 1/4 Style: Spoon Type: Shelf Support Application: 1/4 Hole A shelf support can be either plastic or metal and it is inserted into the sides of furniture beneath shelves to suspend... more

1/4 x 0.4 Nickel Plated Steel Shelf Supports SHSPT-020

Diameter: 1/4 Diameter 2: .4 Material: Steel Finish: Nickel Drill Size: 1/4 Style: Spoon Type: Shelf Support Application: 1/4 Hole A shelf support can be either plastic or metal and it is inserted into the sides of furniture beneath shelves to suspend... more

Slide-co Shelf Support Pegs 1/4 in. Steel Nickle Plated Card Bracket

These Shelf Support Pegs by Slide-Co Products are constructed from heavy-duty steel and come in a nickel-plated finish. These types of shelf support pegs are commonly used in bookcases stereo and storage cabinets to support adjustable glass and wood... more

Uxcell 1/4 Mounting Screw Adapter Slotted 0.16 Alloy Steel Nickel Plated Silver Tone 3Pack

Uxcell 1/4 Mounting Screw Adapter Slotted 0.16 Alloy Steel Nickel Plated Silver Tone 3Pack Made of alloy steel with nickel plated finish which can resist corrosion wear rust and tarnishing. Perfect for use on tripods tripod heads ball heads monopods... more

5/32 x 5/16 x 1/4 Nickel Plated Steel Truss Head Split Rivets (80 pcs.)

Diameter: 5/32 Diameter 2: 5/16 Length: 1/4 Material: Steel Finish: Nickel Head Style: Truss Type: Split Rivet Grip Range: 0.125 Box of 80. more

B&P Lamp® 3/4 Inch Diameter 1/8 IP Stamped Steel Check Ring Nickel Plated Finish

Stamped steel seating ring with curled edge nickel plated slips 1/8IP 3/4 Inch diameter more

1/4 -20 Coarse Thread Acorn Nut 2 Piece Low Carbon Steel Nickel Plated Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-108359 Fastener Type: Acorn Nut 2 Piece Size Description: 1/4 -20 Diameter/Nominal Size: 1/4 Thread Pitch: 20 Thread Pitch Type: Coarse Thread Direction: Right System of Measurement: Inch Grade: 2 Material: Low... more

1/4-20 Open End Acorn Nuts | Low Crown | Steel | Nickel Plated (Quantity: 6000)

1/4-20 Open End Acorn Nuts | Low Crown | Steel | Nickel Plated (Quantity: 6000) more

1/4 Chicago Screw Post (0.6 cm) 10 Packs Nickel Plated Steel Leathercraft Hardware Fasteners

Also known as a Chicago Screw Dimensions: Male:10mm X4.8mm Female:10mm X7mm Threaded post (thread size 8-32) lets you open and reattach pieces when needed. For a more permanent hold try a drop of our ZeliBOND Adhesive. Great for cases straps and more. more

1/4 Cup Washer / Countersunk Finishing Washer Low Carbon Steel Nickel Plated Pk 250

PRODUCT SPECIFICATIONS Part #: 0000-103519 Fastener Type: Cup Washer / Countersunk Finishing Washer Size Description: 1/4 Diameter/Nominal Size: 1/4 * System of Measurement: Inch Grade: 2 Material: Low Carbon Steel Finish: Nickel Plated Used with:... more

1/4 -28 Nickel Plated Steel Fine Thread Acorn Cap Nuts

Diameter: 1/4 Thickness: 15/32 Material: Steel Finish: Nickel Driver Type: 7/16 Wrench Thread Size: 28 (Fine) Shape: Acorn Type: Cap Nut A closed nut having a dome-like cap over the back protruding part of the engaged screw or bolt. Also called an... more

Uxcell 1/4 Mounting Screw Adapter Slotted 0.24 Alloy Steel Nickel Plated Silver Tone 3Pack

Uxcell 1/4 Mounting Screw Adapter Slotted 0.24 Alloy Steel Nickel Plated Silver Tone 3Pack Made of alloy steel with nickel plated finish which can resist corrosion wear rust and tarnishing. Perfect for use on tripods tripod heads ball heads monopods... more

ZoroSelect 1/4 -20 Steel Nickel Plated Finish Acorn Nuts 100 pk.

ZoroSelect 1/4 -20 Steel Nickel Plated Finish Acorn Nuts 100 pk. Cap Nut Profile Standard Crown Material Grade/Class Not Graded Material Steel Finish Nickel Plated Thread Size 1/4 In.-20 Overall Height 0.469 in System of Measurement Inch Pack Size... more

1/4 -20 Nickel Plated Steel Coarse Thread Acorn Cap Nuts (10 pcs.)

Diameter: 1/4 Thickness: 15/32 Material: Steel Finish: Nickel Driver Type: 7/16 Wrench Thread Size: 20 (Coarse) Shape: Acorn Type: Cap Nut Box of 10. A closed nut having a dome-like cap over the back protruding part of the engaged screw or bolt. Also... more

1/4 -20 Coarse Thread Acorn Nut 2 Piece Low Carbon Steel Nickel Plated Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-108359 Fastener Type: Acorn Nut 2 Piece Size Description: 1/4 -20 Diameter/Nominal Size: 1/4 Thread Pitch: 20 Thread Pitch Type: Coarse Thread Direction: Right System of Measurement: Inch Grade: 2 Material: Low... more

1/4 -20 Nickel Plated Steel Coarse Thread Acorn Cap Nuts CNS-048

Diameter: 1/4 Thickness: 15/32 Material: Steel Finish: Nickel Driver Type: 7/16 Wrench Thread Size: 20 (Coarse) Shape: Acorn Type: Cap Nut A closed nut having a dome-like cap over the back protruding part of the engaged screw or bolt. Also called an... more

Uxcell 1/4 Mounting Screw Adapter Slotted 0.24 Alloy Steel Nickel Plated Silver Tone 5Pack

Uxcell 1/4 Mounting Screw Adapter Slotted 0.24 Alloy Steel Nickel Plated Silver Tone 5Pack Made of alloy steel with nickel plated finish which can resist corrosion wear rust and tarnishing. Perfect for use on tripods tripod heads ball heads monopods... more

Uxcell 1/4 to 3/8 Convert Screw Adapter 0.31 Alloy Steel Nickel Plated Silver Tone 5Pack

Uxcell 1/4 to 3/8 Convert Screw Adapter 0.31 Alloy Steel Nickel Plated Silver Tone 5Pack Made of alloy steel with nickel plated finish solid and can resist corrosion wear rust. Perfect for use on tripods tripod heads ball heads monopods light stands... more

B&P Lamp® 4 Inch Nickel Plated 1/8 Ip Steel Threaded Rod

1/8IP steel pipe threaded at each end 3/4 x 3/4 nickel plated 4 long unfinished more

1/4 Cup Washer / Countersunk Finishing Washer Low Carbon Steel Nickel Plated Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-103519 Fastener Type: Cup Washer / Countersunk Finishing Washer Size Description: 1/4 Diameter/Nominal Size: 1/4 * System of Measurement: Inch Grade: 2 Material: Low Carbon Steel Finish: Nickel Plated Used with:... more

1/4 -28 Nickel Plated Steel Fine Thread Acorn Cap Nuts

Diameter: 1/4 Thickness: 15/32 Material: Steel Finish: Nickel Driver Type: 7/16 Wrench Thread Size: 28 (Fine) Shape: Acorn Type: Cap Nut A closed nut having a dome-like cap over the back protruding part of the engaged screw or bolt. Also called an... more

1/4 Cup Washer / Countersunk Finishing Washer Low Carbon Steel Nickel Plated Pk 2500

PRODUCT SPECIFICATIONS Part #: 0000-103519 Fastener Type: Cup Washer / Countersunk Finishing Washer Size Description: 1/4 Diameter/Nominal Size: 1/4 * System of Measurement: Inch Grade: 2 Material: Low Carbon Steel Finish: Nickel Plated Used with:... more

#9 x 1-3/4 Satin Nickel Plated Steel Phillips Flat Head Hinge Screws

Diameter: #9 Length: 1-3/4 Material: Steel Finish: Satin Nickel Head Style: Flat (Phillips) Thread Length: Partial Type: Hinge Screw Used for attaching door hinges. more

6-32 x 1/4 Machine Screw | Phillips | Hex Washer | Steel | Nickel Plated (Quantity: 10000)

6-32 x 1/4 Machine Screw | Phillips | Hex Washer | Steel | Nickel Plated (Quantity: 10000) more

1/4 -20 Nickel Plated Steel Coarse Thread Acorn Cap Nuts CNS-048

Diameter: 1/4 Thickness: 15/32 Material: Steel Finish: Nickel Driver Type: 7/16 Wrench Thread Size: 20 (Coarse) Shape: Acorn Type: Cap Nut A closed nut having a dome-like cap over the back protruding part of the engaged screw or bolt. Also called an... more